Table of Contents
Advertisement
2.3.12 Touch Pad
Disassembly
1. Remove the battery pack, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR and modem card.
(See sections 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6 and 2.3.7 Disassembly)
2. Remove the top cover. (Refer to the steps 1-3 of 2.3.8 section Disassembly)
3. Remove the four screws and lift the shielding, then free the touch pad. (Figure 2-30)
Reassembly
1. Replace the touch pad, then fit the shielding and secure with two screws.
2. Replace the top cover. (Refer to the step 6 of section 2.3.8 Disassembly)
3. Replace the modem card, DDR, CD/DVD-ROM drive, hard disk drive, CPU, keyboard and battery pack.
(See sections 2.3.8, 2.3.7, 2.3.6, 2.3.5, 2.3.4, 2.3.3, 2.3.2 and 2.3.1 Reassembly)
80
50QMA
N/B Maintenance
80
50QMA
N/B Maintenance
Figure 2-30 Free the touch pad
73
Advertisement
Table of Contents
