Lcd Panel - MiTAC 8050QMA Service Manual

2.3.9 LCD Panel

Disassembly
1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR, modem card and LCD
assembly. (Refer to section 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6, 2.3.7 and 2.3.8 Disassembly)
2. Remove the two rubber pads and two screws on the corners of the panel. (Figure 2-20)
3. Insert a flat screwdriver to the lower part of the LCD cover and gently pry the frame out. Repeat the process
until the cover is completely separated from the housing.
4. Remove the ten screws and disconnect the cable. (Figure 2-21)
Figure 2-20 Remove LCD cover
80 50QMA N/B Maintenance
80 50QMA N/B Maintenance
Figure 2-21 Remove the ten screws and
disconnect the cable
67