Modem Card - MiTAC 8050QMA Service Manual

Table of Contents

Advertisement

2.3.7 Modem Card

Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (Refer to section 2.3.1 Disassembly)
2. Remove seven screws fastening CPU cover. (Refer to step 2 of section 2.3.3 Disassembly)
3. Remove two screws fastening the modem card. (Figure 2-12)
4. Lift up the modem card and disconnect the cord. (Figure 2-13)
Figure 2-12 Remove two screws
Reassembly
1. Reconnect the cord and fit the modem card.
2. Fasten the modem card by two screws.
3. Replace the CPU cover by seven screws. (Refer to step 3 of section 2.3.3 Reassembly).
4. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
80
50QMA
N/B Maintenance
80
50QMA
N/B Maintenance
Figure 2-13 Disconnect the cord
63

Advertisement

Table of Contents
loading

Table of Contents