EUROCOM 8880 Dream Machine User Manual page 213

Troubleshooting
8
8 - 16 Display
The computer is set for a different display.
possible cause:
solution: Toggle the screen display key combination, Fn +
F6 ( see Chapter 3:"Attaching a Monitor
(CRT)" on page 3-8 ). If an external monitor is
connected, turn it on.
possible cause: The screen saver is activated.
solution: Press any key or touch the TouchPad to return to
your display.
The screen is flickering.
The vertical refresh rate is insufficient on your
possible cause:
external monitor.
solution: 1. Avoid using the Simultaneous display mode.
Use LCD only or CRT only.
2. Switch to a lower resolution and/or fewer
colors.
3. Adjust the refresh frequency in the display
controls for the monitor ( see Chapter 3:"Verti-
cal Refresh Rate" on page 3-8 ).