Disassembly and Assembly
3.2.7 Removing the HOUSING ASSY.,LOWER
Remove the COVER,REAR. (Refer to Section 3.2.2.)
Step 1 :
Remove the circuit board.( Refer to Section 3.2.3.)
Step 2:
Remove the control panel. (Refer to Section 3.2.4.)
Step 3:
Remove the HOUSING ASSY.,UPPER. (Refer to Section 3.2.5.)
Step 4:
Remove the printer mechanism. (Refer to Section 3.2.6.1.)
Step 5 :
Step 6:
Remove four screws CBB (M4
FRAME ASSY.,BOTTOM.
Remove the power switch from the HOUSING ASSY.,LOWER.
Detach two-notches securing the HOUSING ASSY.,LOWER to the FRAME ASSY.,
Step 8 :
BOTTOM and pull the HOUSING ASSY.,LOWER upward.
Power
Figure 3-32. Removing the HOUSING ASSY.,LOWER
3-24
16) securing the HOUSING ASSY.,LOWER to the
x
I
FRAME ASSY.,BOITOM
\
,
Rev. A