Overview - Epson DLQ-3000 Service Manual

The following sections describe the adjustments required when reassembling the DLQ3000. After
any part concerned is disassembled or replaced for maintenance/repair, be sure to adjust the
printer to guarantee correct operation.
Disassembly/Assembly
BOARD ASSY., C124 MAIN (Section 3.2.3.1)
Printer Mechanism (Section 3.2.6.1)
SENSOR ASSY.,LOAD (Section 3.2.6.3)
MOTOR ASSY.,PF (Section 3.2.6.6)
MOTOR ASSY.,CR (Section 3.2.6.7)
CARRIAGE ASSY. (Section 3.2.6.1 O)
SHAFT, CR, GUIDE
TIMING BELT,CR
PLATEN ASSY. (Section 3.2.6.13)
Rev. A
Table 4-1. Adjustment Items
Platen Gap Adjustment
Default, Machine Information Setting
SENSOR ASSY.,LOAD Adjustment
SENSOR ASSY.,LOAD Adjustment
Belt Tension Adjustment
Platen Gap Adjustment
Belt Tension Adjustment
Platen Gap Adjustment
Belt Tension Adjustment
Platen Gap Adjustment
Platen Gap Adjustment
Belt Tension Adjustment
Adjustment
Adjustment
4-1