Epson DLQ-3000 Service Manual page 122

A.1 CONNECTOR SUMMARY
This section describes the component comection and detailed pin assignments of each connector of
the units.
Figure A-1 shows the component connections of the DLQ-3000, and Table A-1 lists the connector
assignments and reference tables.
Table A-2 through appendix lists connector pin assignments. (Pin assignments of CN1, CN9 on the
(chapter 1) and2-16(chapter 2).)
"DIR" in each table indicates the signal direction viewed from the comector on the board.
PARALLEL l/F]— CN7
SERIAL l/F
TYPE-B IIF
COVER OPEN
Rev. A
BOARD ASSY.,MAIN
1
I
CN14
Figure A-1. Cable Connections
PRINTER MECHANISM
Printhead
MOTOR ASSY., CS
FILM RIBBON SENSOR
COLOR RIBBON SENSOR
SENSOR ASSY., PEW, LEFTIRIGI-IT
MOTOR ASSY., CR
MOTOR ASSY.,PF
SENSOR ASSY., LOAD
FAN ASSY., HEAD
DETECTOR ASSY., PF
DETECTOR ASSY., HP
Appendix