Removing The Board Assy.,Power Supply - Epson DLQ-3000 Service Manual

Disassembly and Assembly
Removing the BOARD ASSY., POWER SUPPLY
3.2.3.2
Remove the COVER,REAR. (Refer to Section 3.2.2.)
Step 1 :
Remove the two screws CBS (M3 x 6) which fix the BOARD ASSY., POWER SUPPLY
Step 2:
to the SHIELD PLATE.
Pull off all the comectors from the BOARD ASSY., POWER SWPLY ~d pull the board
Step 3:
out.
For disassembly, the board should be fixed by tightening the right screw together with the
Note:
FG cable for the FAN ASSY. of the power supply board.
Figure 3-6. Removing the BOARD ASSY., POWER SUPPLY
FG Cable
(FAN