Chapter 3 Disassembly and Assembly
3.2.19 DETECTOR, PE, FRONT Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Remove the Paper Exit ASSY. (See Section 3.2.8)
3. Unhook the detector holder from both the Paper Guide Frame and a shaft of [ROLLER,
PF, DRIVE].
4. Unhook [DETECTOR, PF, FRONT] from the holder and remove it.
CHECK POINT
Make sure to hook the detector holder to [ROLLER, PF, DRIVE] when reinstalling it.
Figure 3-25. DETECTOR, PE, FRONT Removal
Figure 3-26. DETECTOR, PE, FRONT Installation
3-25
Rev. A