Front Pe (Paper End) Detector Removal - Epson LQ-570e Service Manual

EPSON LQ-570e/LQ-580

4.2.9.6 Front PE (Paper End) Detector Removal

1. Remove the printer mechanism. (See 4.2.7 "Printer Mechanism Removal".)
2. Remove 2 clips of front PE detector attached to the rear paper guide assembly and
remove the detector.
3. Disconnect the harness from the detector.
R E A R P A P E R G U I D E A S S M E B L Y
C l i p
F r o n t P E D e t e c t o r
Figure 4-21. Front PE Detector Removal
Disassembly and Assembly
4.2.9.7 Front PE (Paper End) Detector Removal
1. Remove the printer mechanism. (See 4.2.7 "Printer Mechanism Removal".)
2. Release 2 clips of rear paper guide assembly attached rear PE detector. (#1 in the figure
below)
3. Remove 2 notches of the rear paper guide assembly attaching the detector to it, slide
the detector toward rear a little, and then remove the detector downward. (#2 in the
figure below)
4. Disconnect the harness from the detector.
F R A M E , R E A R
R E A R P A P E R G U I D E A S S E M B L Y
Disassembly and Assembly
C l i p s
Figure 4-22. Rear PE Detector Removal
Revision C
R e a r P E D e t e c t o r
87