Specifications; Features - Epson LQ-670 Service Manual

1.1 Specifications

This specifications provide characteristics of the serial impact dot matrix printer LQ-670.

1.1.1 Features

LQ-670 is a 24pin serial impact dot matrix printer for the VAR(value added reseller) market.
The major features of this printer are;
‰Columns
‰Printing Speed
‰Feeding Method
‰Feeder
‰Paper/Media
‰Fonts
‰Character tables
‰Input buffer
‰Acoustic noise
‰Reliability
‰Interface
‰Control code
‰Copy capability
‰Control panel functions
‰Printable area
Rev. A
:106 columns (10cpi)
:High speed draft
:Draft
:LQ
:Friction feed
:Push tractor feed
:Rear push tractor
CSF Bin1/Bin2
Roll paper holder
:Single sheet, Continuous paper, Multi part paper, Envelope, Card,
Label and Roll paper.
:9LQ & 1 Draft Bitmap and 4 Scarable typefaces
:8 Bar code fonts
:Standard version
NLSP version
:64 Kbytes
:55dB(A) (ISO7779 pattern)
:Total print volume
:(MTBF)
:Print head life
:Ribbon life
:Bi-directional parallel interface (IEEE-1284 nibble mode supported)
Type B/I/F level 2 (Option)
:ESC/P 2 and IBM 2390 Plus emulation
:1 original + 4 copies
:Font, Condensed, Pause, Tear off, Bin, LF/FF, Load/Eject, Micro Adjust
and the default settings
:70 lines are available at A4.
(Top margin 0 mm setting and Bottom margin 0 mm setting are available)
Figure 1-1. Exterior of LQ-670
Chapter 1 Product Description
300cps
250cps
83cps at 10cpi
(front manual, rear CSF)
(rear)
(Option)
(Option)
11 tables
20 tables
6.5 million lines(except print head)
5000 POH
200 million strokes/wire
2 million characters
1-1