Adjust Reference Position - Duerkopp Adler 530 Service Instructions Manual
Cnc automat for button sewing
Hide thumbs
Also See for 530:
- Installation instructions manual (31 pages) ,
- Parts list (49 pages) ,
- Operating instructions manual (98 pages)
Table of Contents
Advertisement
2.9.2
Adjust reference position
14
The adjustment of the correct reference position of the sewing motor is
done with the help of the adjusting aid in the control.
Call up adjusting aid
The adjusting aid shows the correct position of crank 1.
–
Switch on main switch.
The control is initialized.
The main menu appears.
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
–
Press key "OK".
After entry of the correct code number the display changes over to
the menu "Technician mode".
Maschine
Benutzer
Service
Freie Konturen
Memory-Dongle
1
machine config
operat.config.
test functions
open patterns
Advertisement
Table of Contents
