Table of Contents
Advertisement
Configure the settings relating to the mail notification [Mail]
Select the [Mail] tab on the "Server" page. (+ Page 60)
The settings of alarm mail notice, the settings of error report mail (+ Operating Instructions (PDF)) and the settings to use the mail
functions can be configured on this tab.
[SMTP server address]
Enter an IP address or a name of the SMTP server to send
e-mails. The name of the SMTP server is available only when
selecting "Manual" or "Auto" for the "Network" page - the
[DNS] tab. Enter up to 255 alphanumeric characters includ-
ing hyphens (-) and periods (.). The name of the SMTP server
is available only when selecting "Manual" or "Auto" for the
"Network" page - the [DNS] tab. Enter up to 255 alphanu-
meric characters including hyphens (-) and periods (.).
[SMTP port number]
Enter the port number of the SMTP server.
1 - 65535
Default: 25
[POP server address]
Enter an IP address or name of the POP server to be used
for POP before SMTP authentication.
The name of the POP server is available only when selecting
"Manual" or "Auto" for the "Network" page - the [DNS] tab.
Enter up to 255 alphanumeric characters including hyphens
(-) and periods (.).
[Type]
Select the authentication method to send e-mails from the
following.
None /POP before SMTP/SMTP
Default: None
[Type - User name]
Enter the user name to be required for the authentication.
Enter up to 32 alphanumeric characters excluding "&" listed
in the description of "Available characters". (+ Page 96)
[Type - Password]
Enter the password to be required together with the user
name for the authentication. Enter up to 32 alphanumeric
characters excluding "&" listed in the description of
"Available characters". An entered character for the pass-
word will be displayed as "∗" or "·". Enter up to 32 alphanu-
meric characters excluding "&" listed in the description of
"Available characters" (+ page 96). An entered character for
the password will be displayed as "∗" or "·".
[Sender's address]
Enter the mail address of a sender. Entered mail addresses
will be displayed in the "From" (sender) line. Enter up to 255
alphanumeric characters including hyphens (-), periods (.),
underscore marks (_) and @. Entered address will be dis-
played in the sender's line ("From" field) of the received mail.
Enter up to 127 alphanumeric characters including hyphens
(-), periods (.), underscore marks (_) and @.
■ Destination address
[Address 1]
Enter the mail addresses of the recipients of the alarm mail
(+ Operating Instructions (PDF)) and the warning mail (+
Operating Instructions (PDF)). Enter up to 255 alphanumeric
characters including hyphens (-), periods (.), underscore
marks (_) and @.
Check the desired mail type (warning/alarm) to be sent.
Up to 4 destinations can be registered. To add destinations,
select the [Setup] of "Other destinations".
97
Hide quick links:
Advertisement
Table of Contents
