Time And Polarities Of The Alarm/Control Terminal; And The Alarm Terminal - Panasonic WJ-HD616/1000 Installation Manual

Time and polarities of the ALARM/CONTROL terminal and the ALARM
terminal
Terminal
Alarm input
Alarm output
Alarm reset input
Emergency recording input
Available disk space warning
output
HDD error output
Camera error output
Error output
Time adjustment I/O
Alarm suspension input
External recording mode
changeover
Sequence switchover I/O
Outage detection input
Outage processing end output
* "Buzzer" can be set on the "Basic" page of the setup menu. (+ Page 65)
Note:
• During "L active (Low active)", the logic will be implemented when the voltage level of signal is low.
• During "H active (High active)", the logic will be implemented when the voltage level of signal is high.
50
Active time
100 ms or more
The set time on the setup menu
100 ms or more
100 ms or more
Duration set for "Buzzer"* starting from the time of the
error occurrence
Duration set for "Buzzer"* starting from the time of the
error occurrence
Duration set for "Buzzer"* starting from the time of the
error occurrence, or until the camera is reset (from the
time of the error occurrence).
Duration set for "Buzzer"* starting from the time of the
error occurrence
Input: 100 ms or more, Output: 1 s
100 ms or more
100 ms or more
100 ms or more
5 s or more
10 s or more
Remarks
When N.O.: L active
When N.C.: H active
L active
L active
L active
L active
L active
L active
L active
Input/Output: L active
L active, judged by level
L active, judged by level
L active
L active
H active