Register Or Change The Administrator Information [Administrator] - Panasonic WJ-HD616/1000 Installation Manual

■ PS.Data
[PSD user]
Configure the settings for a user when using a PS·Data com-
patible controller. A PSD user should be one of the regis-
tered users for the recorder. An auto login user should be
one of the users registered in the recorder.
Register or change the administrator information [Administrator]
Select the [Administrator] tab on the "User mng." page. (+ Page 60)
The administrator information relating to the password and default screen, etc. can be registered on this tab.
To change the administrator information that has been registered, select the [Edit] button after changing each setting item.
[Administrator name]
Enter an administrator name. Enter 5 to 8 alphanumeric
characters for the administrator name. Enter 5 to 14 alpha-
numeric characters for the administrator name.
[New password]
Enter a password for an administrator. Enter 5 to 8 alphanu-
meric characters for the administrator name.
Important:
• For enhanced security, change the password on a regu-
lar basis. Change the password periodically.
[Retype new password]
Enter the password that has been set for "New password"
again for confirmation.
[Level]
Display the operation level of an administrator. It is impossi-
ble to change the setting value for an administrator. "0" has
been set for the administrator.
[Access priority]
Displays the settings to assign priorities to operate the
recorder in case two or more users access the recorder
simultaneously.
It is impossible to change the setting value for an administra-
tor. "0" has been set for the administrator.
[Default screen]
Select a startup display to be displayed after login from the
following.
Cam.1 to 16: Displays an image from the selected cam-
era channel on a single screen.
4Screen-A/4Screen-B/4Screen-C/4Screen-D/4Screen(
WD)/7Screen(WD)/8Screen/9Screen-A/9Screen-
B/9Screen(WD)/12Screen(WD)-A/12Screen(WD)-
B/16Screen
Refer to page 84 for further information about each set-
ting value.
SEQ: Displays images from camera channels sequen-
tially according to the settings performed in advance.
Note:
• When the selected multi-screen setting is unavailable for
the web browser, live images from Camera 1 will be dis-
played after the login from the web browser.
[Camera partitioning]
Determine the operational functions of each camera channel.
It is impossible to change the setting value for an administra-
tor. "0" has been set for the administrator.
[Edit] button
Modifies the administration information.
107