Configure The Settings Relating To Dns [Dns] - Panasonic WJ-HD616/1000 Installation Manual

Configure the settings relating to DNS [DNS]
Select the [DNS] tab on the "Network" page. (+ Page 60)
The settings relating to DNS (Domain Name System) can be configured on this tab.
[DNS]
Determine whether or not to use the DNS.
Off/Auto/Manual
• Select "Manual" or "Auto" to enable IP address
searching by the host name using the DNS.
• Select "Off" when not using the DNS.
• Selecting "Auto" is available only when "On" is
selected for "DHCP" (using the DHCP server).
• Selecting "Manual" is available regardless of the set-
ting for "DHCP" (with or without using the DHCP
server).
• When "Manual" is selected for the DNS, enter the
DNS server addresses in "Primary server address"
and "Secondary server address".
[Primary server address], [Secondary server address]
Enter the IP address of the primary DNS server and second-
ary DNS server. Enter 4 units from the decimal numbers
(0-255).
Default: 0.0.0.0
[Domain name]
Enter the domain name of this recorder. The first character of
the domain name should be an alphabetical character. The
first character of the domain name should be an alphabetical
character.
Enter 3 to 63 alphanumeric characters including hyphens (-)
and periods (.).
Default: localdomain
101