Settings Relating To Cameras [Camera] - Panasonic WJ-ND200 Setup Instructions

Settings relating to cameras [Camera]

Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of
the group and the settings of the sequential display.
Perform the settings for network connection [NW Camera Setup]
Perform the network camera settings such as the camera IP address and the port number.
The settings are configured differently between when automatically detecting and registering the IP addresses of the
cameras and when registering the IP addresses of the cameras manually.
Automatically detect and register the IP addresses of the cameras
Screenshot 1
Click the [Camera] button in the "Setup" panel and then
click the "NW Camera Setup" tab. The "NW Camera
Setup" page will be displayed.
Step 1
Click the [Search] button of "Camera Search" to detect
the cameras.
Notes:
• When "Camera Search" is carried out, the other
login users will be forcibly logged out.
• Recordings currently being carried out on this unit
will stop in the process of "Camera Search".
• "Camera Search" is unavailable for cameras on a
different subnet.
• Depending on the camera model, the unit cannot
detect them for their security when 20 minutes have
passed after the power of the camera is turned on.
Refer to the operating instructions of the camera for
further information.
• The following cameras can be searched by the
"Camera Search" function.
WV-NM100/WV-NS32x/WV-NW47x/WV-NP244
series/WV-NP1000 series/WV-NS202/WV-NF284/
WJ-NT304/WV-NW484
47