Table of Contents
Advertisement
Configure the settings relating to the server [Server]
The settings relating to the NTP server, the FTP server and the mail server can be configured on the "Server" page.
The "Server" page has [NTP], [FTP] and [Mail] tabs.
Configure the settings relating to time adjustment according to the NTP
server [NTP]
Select the [NTP] tab on the "Server" page. (+ Page 60)
The settings when time is adjusted according to the NTP (Network Time Protocol) server can be configured on this tab.
[Time adjustment]
Select "On" or "Off" to determine whether or not to adjust
the time according to the NTP server.
[NTP server address]
Enter the NTP server address when adjusting the time using
the NTP server.
The name of the NTP server is available only when selecting
"Manual" or "Auto" for the "Network" page - the [DNS] tab.
Enter up to 255 alphanumeric characters including hyphens
(-) and periods (.).
Important:
• When "On" is selected for the DHCP setting of the
recorder, the setting for "Time adjustment" will not be
activated in case the time of recorder is ±1 000 seconds
or more different from that of the NTP server.
95
Hide quick links:
Advertisement
Table of Contents
