Table of Contents
Advertisement
Configure the settings relating to SNMP [SNMP]
Select the [SNMP] tab on the "Network" page. (+ Page 60)
The settings for the SNMP can be configured on this tab. The settings are configured to check the status of the recorder, etc. by
connecting the SNMP manager.
[Community]
Enter a name used for SNMP authentication in alphanumeric
characters. Enter up to 32 alphanumeric characters exclud-
ing "&" listed in the description of "Available characters". (+
Page 96)
[System name]
Enter a system name in alphanumeric characters to manage
this unit by the SNMP system, for example, No1. Enter up to
255 alphanumeric characters listed in the description of
"Available characters" (+ page 96).
[Location]
Enter the name of the location where the camera is installed,
for example, 2F. Enter up to 255 alphanumeric characters
listed in the description of "Available characters" (+ page
96).
[Contact]
Enter the contact information such as a mail address of an
administrator of this recorder. Enter up to 255 alphanumeric
characters listed in the description of "Available characters".
Enter up to 255 alphanumeric characters listed in the
description of "Available characters" (+ page 96).
103
Hide quick links:
Advertisement
Table of Contents
