Manage The Settings [Settings Management] - Panasonic WJ-HD616/1000 Installation Manual

Manage the settings [Settings management]
Select the [Settings management] tab of the "Maintenance" page. (+ Page 60)
The settings of the setup pages can be saved in the SD memory card, and saved settings can be called up (loaded) from the
recorder on this tab. It is also possible to restore the default settings (Initialization) on this tab.
[Reset to the default]
Initializes the setting data. Select the [Execute] button to
start formatting.
Note:
• The following setting items will not be reset to the default
or loaded.
• HTTP port number
• FTP port number
• Network port
• Maintenance port
• DNS setting
• Bandwidth control
[Save settings on the SD]
Saves the setting data on the SD memory card. Select the
[Execute] button to start saving.
[Load settings on the SD]
Retrieves the setup data saved on an SD memory card and
saves on the recorder. Select the [Execute] button to start
retrieving.
[Firmware update]
Downloads the software saved on an SD memory card to
the recorder to upgrade the firmware. Select the [Execute]
button to start update. Only an administrator can execute
the firmware update.
123