Table of Contents
Advertisement
Notification by E-Mail
Alarm Mail Notification
The following mail will be sent to notify of an alarm occurrence to a registered address when an alarm occurs.
Contents of the alarm mail:
In ND300A (192.168.1.250), alarm was occurred.
Alarm date:
xx-xxx-xxxx xx:xx:xx GMT xx:xx (Example: 1-JAN-2005 GMT+09:00)
Cause of alarm:
Displays an event type and a camera channel or an alarm number (Example: COMMAND
ALARM 5CH)
File name of alarm image:
URL:
http://192.168.1.250/
Edit the Contents of the Alarm Mail
It is possible to edit the contents of the alarm mail that notifies of the event occurrence with the time and date of the
event occurrence.
To edit the alarm mail, do the following.
Step 1
Edit the contents using text editing software and save in the text format.
Depending on the item (time and date at an event occurrence, cause of alarm, host address, etc.) to be displayed,
the characters to be entered will be different. Refer to the following list of characters to be replaced when editing the
contents of the mail. Save the edited mail contents with the file name "almmail.tmpl".
Step 2
Start up the FTP software and enter the IP address of the unit to connect to that unit.
Enter the user name and password as follows.
User Name:
User ID of the administrator (Default: ADMIN)
Password:
Password respective to the user ID of the administrator (The default password is 12345.)
Refer to a system administrator for further information about the settings of user name and password.
Step 3
Transfer the edited file (almmail_p.tmpl) in the text format.
The directory to be sent is as follows.
/data/HTML_FILES
Note:
It is required to configure the settings in advance to attach an image to a mail. Refer to the setup instructions
(PDF) for further information.
The file name of the image attached to an e-mail.
51
Advertisement
Table of Contents
