HP Compaq MultiSeat ms6000 Hardware Reference Manual page 53

Hardware reference guide hp compaq multiseat ms6000 desktop

Hide thumbs Also See for Compaq MultiSeat ms6000:

Table of Contents

Insert the new battery and position the clip back into place.

Figure B-3

NOTE:

Replace the access panel.

10.

If the computer was on a stand, replace the stand.

11.

Plug in the computer and turn on power to the computer.

12.

Reset the date and time, your passwords, and any special system setups using Computer Setup.

Refer to the Computer Setup (F10) Utility Guide.

13.

Lock any security devices that were disengaged when the access panel was removed.

ENWW

Removing a Coin Cell Battery (Type 3)

After the battery has been replaced, use the following steps to complete this procedure.

Table of Contents

Need help?

Do you have a question about the Compaq MultiSeat ms6000 and is the answer not in the manual?