HP Compaq MultiSeat ms6000 Hardware Reference Manual page 37

Hardware reference guide hp compaq multiseat ms6000 desktop

Hide thumbs Also See for Compaq MultiSeat ms6000:

Table of Contents

10.

Rotate the drive cage to its upright position.

Figure 2-26

11.

Connect the SATA data cable to the white system board connector labeled SATA1.

12.

Route the data cable through the cable guides.

CAUTION:

cage when raising or lowering it. One is located on the bottom side of the drive cage. The other is

located on the chassis frame under the drive cage. Ensure that the data cable is routed through

these guides before connecting it to the optical drive.

13.

Connect the power cable (1) and data cable (2) to the rear of the optical drive.

Figure 2-27

ENWW

Rotating the Drive Cage Up

There are two cable guides that keep the data cable from being pinched by the drive

Connecting the Power and Data Cables

Installing and Removing Drives

Table of Contents