10: Password Change; Printer Baud Rate Screen - Fire-Lite MS-9200UDLS Manual

Master Programming Level
The following screen will appear, which allows the programmer to select the baud rate for the
printer communication:
Pressing the number key corresponding to the desired baud rate (2 for 4800 Baud for example) will
program the control panel for the selected baud rate and return the display to the Option Module
Screen which will indicate Printer/PC PR4800 for a supervised printer installed at 4800 baud rate.
Pressing 3 while viewing the Printer-PC Screen will program the control panel for a PC connection.
The display will return to the Option Module Screen which will indicate Printer/PC PC for
personal computer installed.
NOTE: The LCD-80F and the Printer/PC use the same TB8 terminal block. Only one device can
be used at any one time. Setting any option in the Printer/PC screen to Yes will disable
communications with the LCD-80F. The printer must be installed in the same room and within 50
feet of the FACP.
3.6.10 Password Change
PROGRAMMING The factory set passwords, which have been programmed into the control panel, can be changed by
1=PASSWORD CHANGE
selecting the Password Change option. Pressing 1 while viewing Programming Screen #4 will
2=CLEAR PROGRAM
cause the following screen to be displayed:
3=PROGRAM CHECK
Programming Screen #4
Press 1 to change the Master Programming Level password, 2 to change the Maintenance Level
password or 3 to change the Remote Download password. Note that the passwords will not be
displayed on LCD annunciators.
The following screen will appear when any change option is selected:
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
PRINTER BAUD RATE
1=2400 BAUD
2=4800 BAUD
3=9600 BAUD

Printer Baud Rate Screen

PASSWORD CHANGE
1=MASTER
2=MAINTENANCE
3=REMOTE DOWNLOAD
Password Change Screen
ENTER NEW FIVE DIGIT
PASSWORD
Enter Password Screen
Programming
145