Zones Installed; Zones Enabled; Zones Disabled - Fire-Lite MS-9200UDLS Manual

Master Programming Level
ZONE SETUP

1=ZONES INSTALLED

2=ZONES ENABLED

3=ZONES DISABLED

Zone Setup Screen #2
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Zones Installed
Pressing 1 for Zones Installed, while viewing Zone Setup Screen #2, will display a screen similar to
the following:
00 01 02 03 04 05
This display will show all of the zones that have been programmed into the control panel. Note that
an up and/or down arrow may appear in the upper right corner of the display, indicating that
additional screens of zone information exists. Press the up or down arrow keys to view the
additional zones.
Zones Enabled
Pressing 2 for Zones Enabled, while viewing Zone Setup Screen #2, will display a screen similar to
the following:
00 01 02 04 05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21
This display will show all of the zones that are enabled in the control panel. Note that an up and/or
down arrow may appear in the upper right corner of the display, indicating that additional screens
of zone information exists. Press the up or down arrow keys to view the additional zones.
Zones Disabled
Pressing 3 for Zones Disabled, while viewing Zone Setup Screen #2, will display a screen similar
to the following:
03
This display will show all of the zones that are disabled in the control panel. Note that an up and/or
down arrow may appear in the upper right corner of the display, indicating that additional screens
of zone information exists. Press the up or down arrow keys to view the additional zones.
ZONES INSTALLED
Zones Installed Screen
ZONES ENABLED
Zones Enabled Screen
ZONES DISABLED
Zones Disabled Screen
Programming
95