Fire-Lite MS-9200UDLS Manual page 131

Master Programming Level
ANN-BUS SELECT
1=PRIMARY
2=SECONDARY
3=ANN-BUS OPTIONS
ANN-BUS Select Screen
ANN-BUS
1=ANN-S/PG OPTIONS
2=FUTURE USE
3=ANN-80 OPTIONS
ANN-BUS Screen
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
ANN-BUS

Pressing 3 for ANN-BUS Options, while viewing the ANN-BUS Select screen, will display the
following screen.
ANN-S/PG (Print) Options
The Print option allows the programmer to configure the optional printer. Pressing 1 while viewing
the ANN-BUS screen will display the following screens:
ANN-S/PG OPTIONS
1=PORT
2=PRINTER SUPV
3=OFFLINE TIMER
ANN-S/PG OPTIONS
1=BAUD RATE
2=DATA BITS
3=PARITY
ANN-S/PG OPTIONS
1=STOP BITS
Pressing 1 for Port while viewing ANN-S/PG Options screen #1 will allow the programmer to
select between a Parallel and Serial Port for printer connection. Each press of the 1 key will cause
the display to toggle between Port PAR (parallel) and Port SER (serial). It is important to note that
the interface selected determines which options are available to the user.
If the Parallel Port option is selected, the user has the option to supervise the printer and select an
offline timer for the supervision by pressing 2 for Printer Supervision while viewing Print Options
screen #1. Each press of the 2 key will cause the display to toggle between Printer Supv NO for no
supervision and Printer Supv YES for printer supervision. Note that this option is not selectable if
the Serial Port option has been selected.
ANN-BUS
1=ANN-S/PG OPTIONS
2=FUTURE USE
3=ANN-80 OPTIONS
ANN-BUS Options Screen
ANN-S/PG Options Screen #1
ANN-S/PG Options Screen #2
ANN-S/PG Options Screen #3
PAR
NO
60
N/A
N/A
N/A
N/A
Programming
131