User Control Function Summary – St620Rf Receiver - Salus ST620RF Instruction Manual

ST620RF Manual Version 005 CMYK:Layout 1
The status of the ST620RF Receiver is indicated by the use of two
bi-colour Light Emitting Diodes (LEDs). The status indicators are:
Indicator
Blue / Yellow
Green / Red
User Control Function Summary – ST620RF Receiver
Key/Operation
Auto
Manual
On
Cycle
Off
SYNC Button
Reset Button
ST620RF INSTRUCTION MANUAL
Colour Operating Function
Blue Heat call mode
Yellow Failsafe mode
Green Power on
Red SYNC mode
Functions
Sets Receiver to Automatic mode (default setting)
Sets Receiver to Manual mode
Turns Relay output ON (default setting)
Switches Receiver output on and off in a 15 minute cycle (4 minutes on, 11 minutes off)
Turns Relay output OFF
Enables RF signal synchronisation with ST620RF Control Centre
Resets the Receiver to default (original factory) settings
1/9/10 11:56 Page 17
17