Salus ST620 Programming

PROGRAMMING THE SALUS ST620/ST620RF
The ST620 offers great versatility with its programming options,
allowing the user to programme the ST620 to operate on an individual,
5/2 or 7 day control cycle. The programmable thermostat has a default
set of Programmes that have been designed to meet the needs of most
users. If these default programmes are not suitable for your particular
situation, reprogramming the ST620 with your own settings is a very
straightforward operation. To start programming the ST620, press the
OK key when in NORMAL mode. This will by default select the
PROGRAMME menu - press the OK key once more to start the
programming process. Initially, the Weekdays will be selected and
flashing – you can scroll through all the various options for day
selection (Weekdays, Weekend, 7 days, or individual days) by using
the Touch Ring. As usual, pressing the OK key will select the desired
After correct selection of the day option, the ST620 display will change
to the next programming screen. These screens allow you to set the
required time and temperature settings to provide optimum control for
The hour setting will be the first setting that needs to be adjusted, and
this will easily be seen because the 'hours' section of the time will be
flashing. Using the Touch Ring, scroll up or down to adjust the hour to
the required setting and then press the OK key to confirm. After
confirming this setting the 'minutes' section of the time will then start to
flash. Change this setting using the Touch Ring in the same way that
you changed the hour setting, confirming your setting with the OK key.
option.
your heating system.