Salus ST620RF Instruction Manual page 24

ST620RF Manual Version 005 CMYK:Layout 1 1/9/10 11:57 Page 24
Use the Touch Ring to enter the date
in exactly the same way as for the
holiday start date.
By default, the HOLIDAY mode start
and end dates are set to the current
date. Make sure that the end date
is after the start date – if not, the
HOLIDAY mode will be disabled.
The final setting to be entered is the
protection temperature you want set while HOLIDAY mode is active.
Use the Touch Ring to set the preferred temperature and confirm the choice using the OK
button. Once the temperature setting is confirmed, the HOLIDAY mode will be activated.
While in this mode the HOLIDAY mode indicator will be shown on the display, but
there will not be any MANUAL or AUTO indication.
Pressing the Touch Ring will change the display to show the current temperature setting,
but this setting cannot be adjusted while in this mode.
24 ST620RF INSTRUCTION MANUAL