ST620RF Manual Version 005 CMYK:Layout 1
INTRODUCTION
A programmable thermostat is a device that combines the functions of both a room thermostat and heating
controller into a single unit. The programmable thermostat is used to switch the heating system by means of time
and temperature change. This unit is not like a standard programmer. It works by controlling the temperature
according to a series of programmed settings that take effect at different times of the day.
The ST620RF from Salus Controls is a stylish and accurate 5/2 or 7 day
programmable electronic thermostat with a large, easy to read Liquid Crystal
Display (LCD). This programmable thermostat has been specifically designed to
be used Volt Free. Unlike ordinary single unit design programmable thermostats,
this is a new type of unit that separates the operational functions into two units.
The Receiver is used for wiring connections and heat on/off control. The Control
Centre provides the user interface and temperature sensing / control. The two
units are linked together by a Radio Frequency (RF) signal.
The use of the revolutionary Touch Ring technology makes for simple usage, and
is coupled with a unique, smart design. The LCD display will show the current room
temperature and the 'one touch' operation makes the ST620RF easy to operate.
FEATURES
•
Touch Ring Technology
•
Large LCD with White Backlight
•
Stylish Casing
•
Volt Free Contacts
•
Intelligent Communication Technology
•
Battery Powered with Replacement Indicator
•
Frost Protection
4
1/9/10
11:56
Page 4
•
Burner on Symbol
•
Radio Controlled Clock (RCC)
•
Manual Time / Date Setting Option
•
Holiday Function
•
Service Function
•
Six Time / Temperature Settings / day
•
Secure RF Transmission
(one million unique RF address codes)
ST620RF INSTRUCTION MANUAL