Load Discs; Load Input Bin 1; Load Input Bin 2 (5300N Only) - Rimage Professional 5300N User Manual

Rimage Professional 5100N and 5300N User Guide

Load Discs

Each input bin holds up to 50 discs. Use thermal printable discs, found in Rimage
Media Kits, that are compatible with the Everest printer. Refer to the Rimage
Everest Printer User Guide for more information.

Note: Input bins can be configured for multiple media types. Refer to the
Rimage System Manager online help for more information.
-
Important! Be sure to hold the input bin by the
thumb plate when unloading and loading the
bins. The thumb plate must be facing toward
the front when you place the input bin into the
autoloader.

Load Input Bin 1

1. Open the front door.
Remove input bin 1.
2.
3. Place the discs in the input bin with the
recording side facing down.
-
Important! Hold the discs by the edge.
Fingerprints affect print quality.
4. Place input bin 1 in the Professional.
Tip: When it is seated properly, the
input bin fits into the holes in the
bottom of the autoloader.
5. Close the front door.
Load Input Bin 2 (5300N
only)
1. Open the front door.
2. Press the pivot tray button.
Input bin 2 opens.
Remove input bin 2.
3.
4. Place the discs in the input bin with the
recording side facing down.
-
Important! Hold the discs by the edge.
Fingerprints affect print quality.
15
Pivot Tray
Button
Input Bin 2
Input Bin 1
2000447_E