Operate The Professional; Power On The Professional; Power Off The Professional - Rimage Professional 5300N User Manual

Operate the Professional

Power On the Professional

1. Be sure that the power switch on the
back of the unit is in the On position.
2. On the front of the autoloader, press
the embedded PC power button to
power on the Professional.
When the Professional completes
the initialization, the operator panel
displays [RIMAGE SYSTEM READY].

Note: The Professional can take
up to 5 minutes to initialize.
Front View

Power Off the Professional

1. Close all open software applications or projects.
2. Briefly press the embedded PC power button to shut down Windows and
the embedded PC.
n
Caution: Do not press and hold the embedded PC power button. If you
press and hold the PC power button, the embedded PC will not shut
down properly. This may cause data loss or corruption.

Note: It takes approximately 30 seconds for the Professional to power
off.
2000447_E
Operate the Professional
Embedded
PC Power
Button
Power
Switch
14