Power Off; Power Off The Rimage Dln5200; Power Off The Rimage Dl5200; Load Discs - Rimage DL5200 User Manual

Rimage DL5200/DLN5200 User Guide

Power Off

Power off the Rimage DLN5200

1. Close all open applications.
2. Briefly press the PC power button to shut down the software,
Windows, and the embedded PC.
Caution: Do not press and hold the PC power button. If
you press and hold the PC power button, the embedded
PC will not shut down properly. This may cause data loss
or corruption.
Note: Powering off the DLN5200 takes approximately 30
seconds.
3. When the PC has powered off, press the main power switch
to power off the DLN5200.

Power off the Rimage DL5200

1. Close all applications.
2. Pre s the main power switch to power off the Rimage DL5200. s
Note: When you start the Rimage DL5200 again, you must first pow er on the DL5200 and then
power on the attached computer so the recorders are recognized.

Load Discs

The input bin holds up to 50 discs. Use the
recommended Rimage media with the Everest
printer.
1. Open the supply door.
2. Remove the input bin.
12
PC Power Button
Supply
Door
110768_F