Supply Pcb - Canon NP6512 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
2. Removing the Composite Power

Supply PCB

1) Remove the copyboard cover or the ADF.
2) Remove the left cover and the rear cover.
3) Remove the screw [1], and remove the
copyboard cover foot retainer [2].
4) Disconnect the eleven connectors [3]
from the composite power supply PCB,
and disconnect the connector [4] from the
main motor assembly.
7-22
COPYRIGHT © 1999 CANON INC.
[3]
[3]
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 7-328
[4]
Figure 7-329
[1]
[2]
[3]