Canon NP6512 Service Manual page 133

2. Removing the Pre-Exposure Lamp
PCB Unit
1) Remove the drum unit.
(See A.2. "Removing the Drum unit.")
2) Disengage the two claws [1], and remove
the pre-exposure lamp unit [2].
3) Remove the screw [3], and remove the
pre-exposure lamp unit cover [4].
COPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
[1]
Figure 4-312
[3]
Figure 4-313
[2]
[4]
4-41