Canon NP6512 Service Manual page 262

CHAPTER 9 INSTALLATION
Step
6 Open the copyboard cover, and remove the
protective sheet; then, close the cover.
(Copyboard type only)
Caution:
If the protective sheet is not fond on the ma-
chine, go to the next step.
Open the ADF, and remove the protective
members; then, close the ADF. (ADF type
only)
Caution:
You will need this protective member when
relocating the machine. Be sure to store it
away appropriately.
Pull the open/close lever found on the left of
7
the machine to open the machine's top unit;
then, remove the two protective members.
Caution:
If the protective member is not found on the
machine, go to the next step.
9-4
COPYRIGHT © 1999 CANON INC.
Work
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Checks and remarks
Protective sheet
Protective members
Open/close lever
Machine's top unit
Protective members
ADF