Canon NP6512 Service Manual page 161

2. Removing the Pickup Clutch
1) Remove the front lower cover.
(See Chapter 7.III.A.2. "Removing the
Front Lower Cover.")
2) Remove the registration roller unit.
(See D.1. "Removing the Registration
Roller Unit.")
3) Open the machine's top unit farther, and
hold it in place with the handle of a screw-
driver (about 30 mm in diameter).
4) Disconnect the two connectors [1], and
remove the two screws [2] then, detach
the solenoid unit [3].
COPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Figure 5-207
[1]
Figure 5-208
[2]
[3]
5-17