Canon NP6512 Service Manual page 190

CHAPTER 6 FIXING SYSTEM
3. Removing the Fixing Lower Roller
1) Remove the fixing assembly.
(See 2. "Removing the Fixing Assem-
bly.")
2) Remove the two screws [1], and free the
two hooks [2]; then, detach the fixing up-
per stay [3] by turning it in the direction of
the arrow.
3) Detach the harness band [4] from the side
plate, and remove the fixing upper unit
[5].
Caution:
Do not disassemble the fixing film and
the fixing heater. They cannot be re-
placed on their own.
6-12
COPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 6-205
[5]
Figure 6-206
[3]
[2]
[4]