Removing A Rear Smart Fan Assembly; Replacing A Rear Smart Fan Assembly; Removing And Replacing A Pci-X Smart Fan Assembly; Rear Fan Detail - HP rp7420 Service Manual
Hp 9000 rp7420 server - user service guide, fifth edition
Hide thumbs
Also See for rp7420:
- User manual (38 pages) ,
- Administrator's manual (266 pages) ,
- Manual (114 pages)
Table of Contents
Advertisement
Removing a Rear Smart Fan Assembly
Figure 6-13 Rear Fan Detail
To remove a smart fan assembly, follow these steps:
1.
Push the fan release pin away from the fan.
2.
Slide the fan away from the connector.
3.
Pull the fan away from the chassis.
Replacing a Rear Smart Fan Assembly
To replace a smart fan assembly, follow these steps:
1.
Carefully position the fan assembly on the chassis fan guide pins.
2.
Slide the fan into the connector.
3.
Verify that the fan release pin is in the locked position.
NOTE:
Removing and Replacing a PCI-X Smart Fan Assembly
The PCI-X smart fan assembly is located at the front of the PCI card cage, toward the middle top
portion of the server. The fan assembly is a hot swappable component.
A green fan LED indicates the fan is operational.
Removing and Replacing a PCI-X Smart Fan Assembly
95
Hide quick links:
Advertisement
Table of Contents
