Resetting the MP through a modem connection can cause Admin^M to display on every Enter
keystroke. Attempting a modem reset (MP command MR) does not clear this incorrect response.
This is not experienced with a telnet connection.
To regain control with a new Login prompt, follow these steps:
1.
Enter Admin (case sensitive) and press < enter > < ctrl + enter > keys.
2.
A new Login prompt is created.
3.
To move on to the Password prompt, re-enter Admin < ctrl + enter >.
4.
To reach the Main Menu, enter Admin < ctrl + enter >.
This fixes the ^M problem. The issue returns if the MP is reset through the modem.
Server Management Overview
Server management consists of four basic functional groups:
•
Chassis management
•
Chassis logging
•
Console and session redirection
•
Service access
Chassis Management
Chassis management consists of control and sensing the state of the server subsystems:
•
Control and sensing of bulk power
•
Control and sensing of DC-to-DC converters
•
Control and sensing of fans
•
Control of the front panel LEDs
•
Sensing temperature
•
Sensing of the power switch
•
Sensing chassis intrusion
•
Reading FRU PROMS
Chassis Logging
Chassis logging consists of maintaining logs of chassis codes:
•
Boot codes
•
Activity codes
•
Error codes
Console and Session Redirection
Console and session redirection enables the console and session terminals to be connected over
the RS-232 port, a modem, or a LAN connection (web console).
Service Access
Service access enables access to and control of the server state. Service access is secured by a
password. Service access functions include the following:
•
Access to chassis logs
•
Configuration of partitions
•
Control for online addition and replacement
•
Access to the virtual front panel
•
Transfer of control and reset
Server Management Overview
79