Installing System Hardware; Installing System Enclosures - HP BL20p - ProLiant - G2 Setup And Installation Manual

This chapter provides installation procedures for the following system infrastructure
components:
•
Power enclosures
•
Server blade enclosures
•
Hot-plug power supplies
•
Interconnects and their respective modules
•
Bus bars
You can also refer to the installation procedures on the HP ProLiant BL p-Class
System Hardware Installation and Configuration poster.

Installing System Enclosures

To install a power enclosure or server blade enclosure, use the sections in this chapter
to complete the following steps:
1. Measure with the rack template.
2. Install the rack rails and cage nuts.
3. Load the enclosures into the rack.
HP ProLiant BL p-Class System Setup and Installation Guide

Installing System Hardware

3
3-1