Hot-Plug Power Supply - HP BL20p - ProLiant - G2 Setup And Installation Manual

Hot-Plug Power Supply

The hot-plug power supply has LEDs to indicate fault and power status. Use
Figure D-5 and Table D-5 to identify LED locations and functions.
Figure D-5: Hot-plug power supply LEDs
Table D-5: Hot-Plug Power Supply LEDs
Item
1
2
HP ProLiant BL p-Class System Setup and Installation Guide
LED Description Status
Power Green = Power is available.
Green flashing = Hot-plug power supply is
in standby.
Off = No power is available, and/or
hot-plug power supply has failed.
Fault Amber = Hot-plug power supply has failed.
Amber flashing = Current limit has been
exceeded, and/or system has too few
hot-plug power supplies.
Off = Normal
LEDs and Switches
D-7