HP BL20p - ProLiant - G2 Setup And Installation Manual page 56

Figure 4-5: Mini bus bar cabling configuration
Table 4-5: Mini Bus Bar Configuration
Item Description
1 Network cables (number of cables depends on
interconnect option or solution)
2 Bus bar DC output power cables with couplers
3 Management module cables*
4 Power enclosure DC output power cables
5 Power enclosure AC input power cords
* In a full-rack 42U solution, an additional management module
cable connects modules between the two pairs of mini bus
bars.
HP ProLiant BL p-Class System Setup and Installation Guide
Cabling and Powering Up the System
4-11