Chapter 5. Installing Internal Options - Microtower Model; Removing The Cover; Copyright Ibm Corp - IBM 6339 User Manual

Chapter 5. Installing internal options — microtower model

Removing the cover

© Copyright IBM Corp. 2001
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the
instructions that come with the option.
Important:
Read "Safety Information" on page v and "Handling static-sensitive devices"
on page 8 before removing the cover.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Remove the thumbscrews from the rear of the computer and slide the cover
toward the rear of the computer.
41