Cisco WS-C2950-24 Configuration Manual page 281

Chapter 8 Configuring VLANs
Command
Step 16
interface fa0/1
Step 17
spanning-tree vlan 8 9 10
port-priority 10
Step 18
end
Step 19
interface fa0/2
Step 20 spanning-tree vlan 3 4 5 6 port
priority 10
Step 21
exit
Step 22 show running-config
78-6511-05
Purpose
Enter interface configuration mode, and define the
interface to set the STP port priority.
Assign the port priority of 10 for VLANs 8, 9, and 10.
Return to global configuration mode.
Enter interface configuration mode, and define the
interface to set the STP port priority.
Assign the port priority of 10 for VLANs 3, 4, 5, and 6.
Return to privileged EXEC mode.
Verify your entries.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Load Sharing Using STP
8-49