Cisco WS-C2950-24 Configuration Manual page 64

Cluster Manager and VSM
Table 2-9 VSM and Cluster Manager Menu Bars (continued)
Menu Bar Options
Device
Cisco Group Management
Protocol (CGMP)
Spanning-Tree Protocol (STP) Display and configure STP parameters for a switch.
LRE Profile
Port
Port Configuration
Port Statistics
Port Search
Port Grouping (EtherChannel) Group ports into logical units for high-speed links between switches.
Switch Port Analyzer (SPAN) Enable SPAN port monitoring.
Flooding Control
VLAN
VLAN Membership
Management VLAN
(VSM-specific)
VTP Management
VMPS Configuration
(VSM-specific)
Security
Address Management
Port Security
Help
Contents
Legend
About
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
2-16
Task
Enable and disable the CGMP and the CGMP Fast Leave feature on a
switch.
Display the LRE profile settings for the Catalyst 2900 LRE XL
switches, and configure the speed of the LRE link.
Display and configure port parameters on a switch.
Display the Ethernet and LRE link statistics.
Search for a port through its description.
Enable broadcast storm control and block unicast and multicast
flooding on a per-port basis.
Display VLAN membership, assign ports to VLANs, and configure
Inter-Switch Link (ISL) and 802.1Q trunks.
Change the management VLAN on the switch.
Display and configure the VLAN Trunk Protocol (VTP) for
interswitch VLAN membership.
Configure the VLAN Membership Policy Server (VMPS).
Enter dynamic, secure, and static addresses into a switch address table.
You can also define the static addresses forwarding behavior.
Enable port security on a port.
List all of the available online help topics.
Display the legend that describes the icons, labels, and links.
Display the version number of VSM or Cluster Manager.
Chapter 2 Getting Started with CMS
78-6511-05