Simrad AP25 Manual page 36

Simrad AP25 Autopilot
STANDBY
Non-Follow Up
steering mode
AUTO mode
When operating an On/Off thruster be aware that most electrical
Note !
thrusters have a built in thermal cut-off switch. The switch will
shut off the motor if it is overheating and re-engage it when it
has cooled down. The water temperature also affects the running
time. The On/Off thruster may only run for a few minutes, and
the total running time for a longer period should be limited by
increasing the thruster sensitivity value (see page 57).
34
Heading to be
maintained by rudder
Heading maintained by
rudder
Heading to be
maintained by rudder
and thruster
Heading maintained
by rudder and thruster
20221495F