Clearing Paper Jams - Olivetti SIMPLE_WAY User Manual

Problem
The USB status LED on the front
panel does not switch on
although a USB device is
connected to the printer.
note: If the printer is used from the front control panel and an error has occurred. To restore normal
operating conditions, eliminate the error and then repeat the operation

CLEARING PAPER JAMS

1 Take firm hold of the jammed paper and pull it out gently from the place where it is jammed. If the
paper tears, make sure you remove all the torn pieces from the printer.
2 Press the "Cancel" ("C") button on the front panel to clear the error condition.
note: If the paper jam occurred when copying or printing without a computer, the print job continues
from the next page.
If the jam occurred when using a computer, a pop-up screen is displayed allowing you either to
continue printing from the next page or to cancel the print job.
46 CHAPTER 5
Possible Cause
• The USB device connected to
the USB connector on the
front panel is not recognised
by the printer.
Corrective Action
• Connect a USB device
compliant with the printer
requirements as regards
connecting USB devices.