Olivetti SIMPLE_WAY User Manual page 31

The scanner driver user interface screen is displayed with a low resolution preview of the document or
image on the left-hand side of the screen. You can:
• Use selection handles to delimit the area of the preview image you want to scan.
• Rotate, flip, enlarge or reduce the preview image.
• Scan a new preview if you accidentally removed the original from the scanner glass.
• Launch your final scan according to the settings you have made.
On the right-hand side of the scanner driver interface screen, customise your scan settings as indicated
in the following table:
Scanner Driver
Standard
Custom
You can:
• Define whether the document to scanned consists of black text or line
art only, a combination of black text or line art, colour graphics or
photos, or just photos, and therefore scan at 150 dpi, 300 dpi or
600 dpi respectively.
• Select whether to scan in full colour at 24 bits/pixel, in grey at
8 bits/pixel or in black and white at 1 bit/pixel.
• Return the screen settings to their factory default values, or save the
settings so they are applied to your next print job.
• Select the resolution at which you want to scan.
• Select the colour depth, that is the number of distinct colours that can
be represented in number of bits.
• Lighten or darken the image you want to scan.
• Increase or decrease the contrast of the image to be scanned.
• Activate a filter to smooth the image, for example when scanning
magazine pages.
USING YOUR PRINTER FROM A COMPUTER 25