Directions For Use - Microlife IR1DB1 Instruction Manual

NOTE:
• In order to avoid spreading germs, please use a new probe cover for each measurement.
• Check to ensure probe cover is fitted on firmly before use (please see the diagrams below).
If the probe cover is broken, discard and apply a new one immediately.

7. Directions for Use

Important: Prior to every measurement, fit a new undamaged Probe Cover on the measuring
probe. Failure to do so may result in incorrect temperature measurement.
1. Press the ON/OFF button. The display is activated to show all
symbols for 2 seconds.
2. The last measurement reading will be shown on the display
automatically for 3 seconds with the "M" symbol visible.
3. A beep sound is heard. The °C or °F symbol will flash. The
thermometer is ready to measure.
4. Straighten the ear canal by pulling the outer ear
up and back to give a clear view of the eardrum.
• For children under 1 year:
- Pull the ear straight back
• Children ages 1 year to adult:
- Pull the ear up and back.
(Caution: Many pediatricians suggest use of ear
thermometers for children older than 6 months.)
5. While pulling the outer the ear, insert the probe snugly into
the ear canal and press the "START" button. Release it, when
you hear a beep sound. A beep indicates measurement is complete.
6. Remove the thermometer from the ear. The display shows the
measured temperature.
5
(X) Incorrect ( ) Correct
1 year-adult Newborn-1 year